فروش سختی سنج پرتابل
ساخت کمپانی Salutron آلمان
مدلD600
Technical Specifications
Hardness units
HL (Leeb), HB (Brinell), HRB (Rockwell B),
HRC (Rockwell C), HV (Vickers), HS (Shore D)
Measuring range 170 - 960 HLD
Measuring direction 360°
Standard impact device D
Memory size 48-600 groups (relative to number of impact impact times 1-32)
Statistics
Number of group, date, average value, impact device, impact
times, material, measured values
Setting of limits Acoustic signal by overstepping preset min. und max. limits
Minimum weight of sample
» 5kg solid material;
2-5kg on stable surface;
« 2kg with coupling paste on stable surface
Memory function Manually or automatically
Data transfer Cable (both USB and RS232-connection) und software
Languages device and manual English
Display 128 × 64 Dot-Matrix-LCD
Backlight ON / OFF key
Battery capacity 100 hours (without backlight)
Auto Power Off After 5 minutes
Power supply 2 x 1,5 Volt-AA-batteries
Relative humidity ≤ 90%
Working temperature -10°C to +40°C
Weight 380 g (with batteries)
Size 125 x 67 x 30mm
Equipment
Main Application
Impact device D: Universal device for most hardness requirements
Impact device DC: Ultra-short version; manually loaded on the
front; same characteristics as type D; for testing in boreholes,
built-in parts, hollow cylindrical parts, etc.; max. 940 HV
Impact device D+15: The front part is narrow and the coil is
located behind it; same characteristics as type D; only for steel;
for hardness testing in slots, grooves, recessed areas, gear flanks,
grooves, cavities, tooth flanks, etc.; max. 940 HV
Impact device G: With large test-tip diameter; impact energy 9
times larger than type D; on steel, gray or nodular cast iron; for
large cast parts and forgings or parts with high surface roughness;
max. 650 HB (only in Brinell)
Impact device C: Reduced impact energy of about ¼ of type D;
for tempered or surface treated steel, small or sensitive-to-shock
parts (minimal imprint is left); max. 1000 HV
Impact device E: With a synthetic diamond test tip of approx.
5000 HV; for very hard materials (above 50 HRC / 650 HV) such
as carbide, barrels, etc.; max. 1200 HV
Impact device DL: With extremely long and fine front piece only
for steel and cast steel; for testing in narrow or hard to reach
areas; max. 950 HV
Standard Impact
Device D
HRB HRC HB HV HS
Steel,
Cast Steel
38-100 20-69 127-651 83-976 32-100
Cold Work Steel - 20-67 - 80-898 -
Stainless Steel 47-102 - 85-655 85-802 -
Gray Cast Iron - - 93-334 - -
Nodular Cast
Iron
- - 131-387 - -
Aluminum
Alloys
24-85 - 19-164 - -
Brass 14-95 - 40-173 - -
Bronze - - 60-290 - -
Copper - - 45-315 - -
Impact devices for HardyTest D600®
Main unit
Impact device D
Cleaning brush
Small support ring
High value Leeb test block
Manual
Service-case
USB/RS232-cable
Software HT-50 Data View on USB Stick
–
–
–
–
–
–
–
–
–
Set of supporting rings
Printer
Other impact devices
–
–
–
Standard delivery Optional
Technical details are subject to change.

تلفن :	منقضی شده
منطقه :	استان تهران
آدرس :	استان تهران - تهران

تماس با آگهی دهنده ()
در مورد: سختی سنج پرتابل

نام :
ایمیل یا تلفن :
پیام :	با سلام

کلمات کلیدی :

ورود کاربران

آپلود ویدیو

پرداخت با کارتهای عضو شتاب

آگهی های جدید

کلمات کلیدی

سختی سنج پرتابل

آگهی های مرتبط